Telex Airman 8+ ANR Headset - Twin Plugs, 600 Ohm

€845.00*

Available, delivery time: approx. 1-3 working days

Article no: 200336
Manufacturer number: AIRMAN8P-0210 (F.01U.373.590)

The Telex Airman 8+ is a lightweight noise-reducing headset designed specifically for optimizing pilot communications in commercial and business turbine aircraft. Building on the tradition of the Airman 850 and the Airman 8, Airman 8+ has improved ANR capability and wearing comfort. The Airman 8+ is among the lightest Active Noise Reduction headsets on the market, and a FAA TSO C139a approved ANR headsets to utilize Telex’s proprietary of battery-free system. Larger pliable ear cushions and headband pad combined with dual axis ear cup pivots to provide long flight wearing comfort.

Telex Airman 8+ features:

·       Flexible boom-mounted microphone, positionable for right- or left-side use

·       Light-weight, battery-free ANR with onboard fail-safe to ensure constant communication

·       Larger soft leathette ear cushions and headband pad

·       Stainless steel headband and pivot points for superior durability

·       FAA TSO C139a approved



Telex Airman 8+ Specifications:

·       Headphones Type - dynamic

·       Headphones Impedance - 600 Ω ± 20% @ 1 kHz

·       Headphones Frequency Response - per RTCA DO-214a <15dB max. to min. over the range of 315 to 3,150 Hz

·       Headphones Sensitivity - per RTCA DO-214a 92 ±5 dBSPL (normal), 98 ±5 dBSPL (high)

·       Microphone and Amplifier Element Type - noise-canceling amplified electret

·       Microphone and Amplifier Frequency Response - per RTCA DO-214a -28 dB ±3 dB re 1V/Pa at 1kHz, 12V

·       Microphone and Amplifier Operating Voltage - per RTCA DO-214a 8-28 VDC at boom microphone (470 Ω load circuit) or at pin 5 of the XLR connection

·       ANR Power Supply - twin plug version receives power from boom microphone connection / XLR-5 version receives power from either the boom microphone connection or pin 5

·       ANR Attenuation - provides nominal noise reduction 18 dB or higher between 100 Hz and 400 Hz and 15 dB (minimum) of attenuation between 100 Hz and 300 Hz

·       Connector Type - twin plug connector (mic. PJ-068, headphones PJ-055)

·       Weight (without cord) - approx. 125 g

·       Cord Length - approx. 6 ft. (1.8 m)

·       Color - mainly black with Stainless Steel components

·       Controls - Active Noise Reduction (ANR) ON/OFF switch, Volume normal/high switch



This version is: Telex Airman 8+ with twin plu connector

Delivery includes: Telex Airman 8+ (incl. twin plug connector, small headband, mic cover), black headset carrying case.