TRIG TN72 GPS Receiver

ADS-B Out enhances your aircraft’s visibility to others, it has genuine safety benefits for pilot and passengers. Trig transponders are ADS-B Out capable, but they require the addition of a suitable GPS source to exploit this surveillance technology. Pilots with a Trig transponder can simply add a TN72 GPS Position Source to upgrade to ADS-B Out.

Installing a TN72 is a small price to pay for enhanced visibility and peace of mind by reducing the risk of collision. The TN72 GPS is light weight, compact and easy to install. It is highly affordable and uses certified technology - ensuring you are visible to all ADS-B In traffic devices. Don’t compromise your safety by using an uncertified GPS, this can make you invisible to traffic products designed to ‘reject’ uncertified positional data.

In Europe, the TN72 can be installed as a ‘voluntary’ ADS-B Out installation, in both EASA certified aircraft and all other uncertified types. EASA’s CS-STAN provides a specific and simple installation pathway. If you don’t have a Trig transponder, then the TT21/TN72 Conspicuity Bundle provides you with an ideal one box Mode S and ADS-B Out solution.

TRIG TN72 GPS Receiver features:

·       Simple ADS-B Out upgrade for all Trig transponders

·       Suitable for experimental aircraft / gliders and light-sport pilots for 2020 compliance in U.S.

·       Safer - visible on all ADS-B In systems

·       Enables live tracking of aircraft (with suitable ADS-B In equipment)

·       Low cost and light weight

TN72 GPS Receiver Specifications:

Type - TABS GNSS

Certification - TSO-C199 Class B

Compliance - TSO-C199 Class B, DO-160G

Supply voltage (DC) - 11-33 V

Typical consumption (at 14V) - at 14V - 0.1A

Operating temperature: -40°C to + 70°C

Cooling requirement - no fan required

Weight - 110 grams (3.8 ounces)

Connector - GPS (power, ground and GPS data) 9 way D type

Antenna - 5V phantom power QMA male

Dimensions (mm) - H 30 mm x L 90 mm x W 63 mm (W with base flange 80 mm)

Dimensions (inches) - H 1.2" x L 3.6" x W 2.5" (W with base flange 3.2")